CityMaxx System | HydroCare
Whole House Treatment
High Capacity Purification
Limescale Elimination
Why Filtering Your Drinking Water Is Not Enough?
Chlorine is a chemical most commonly known for its use in pools. However, it is found in more places than just this summer hangout. Chlorine is a key component in products ranging from pesticides...
Tap Water Contaminants
Contaminants that can sometimes be found in drinking water can have a serious effect on your health. Some contaminants, such as cesium, iodine, lead, strontium, and tritium can lead to cancer...
CityMaxx Three State Filtration Process:
Stage 1
Incorporates a 25 to 1 micron pre-filter removes sediment, insoluble iron and microorganisms such as cysts. It extends life of other filters.
Stage 2
Unique Carbon block with patented Nanotechnology removes and reduces impurities such as chlorine, cysts, chemicals, insoluble lead and mercury, parasites, THMs, VOCs, and much more. The carbon block goes down to .5 micron without pressure loss. It removes parasites as no known parasite smaller than 1 micron.
Stage 3
Complete Scale prevention and removal in all pipes and heat exchangers. Through the scientific process of Nucleation Assisted Crystallization (NAC), the catalytic media transforms the calcium and magnesium minerals into harmless, Nano-sized crystal particles. The crystals remain suspended and do not adhere to pipes or heating elements. They also dissolve preexisting scale deposits.
The CityMaxx is unlike any other system on the market. It is a large capacity purification system for the whole house PLUS green technology for the removal of existing and prevention for future limescale buildup for homes on city water.
This innovative filtration system is designed for homes of all sizes:
- 99% Removal of Chlorine, Cysts & Parasites
- 95% Removal of THMs & VOCs
- High Reduction of Chemicals & More
- Reduces odors and improves taste
- Treats High Levels of Hardness
- 100% Removal of old scale deposits
- Green Technology – No Salt, No Chemicals, No Electricity
- Media is ANSI/NSF 61 certified
- PLUS Pre-Filter to Remove Sediment
- Easy to Install & Maintain
SKU:WH-CMSYS
| Maximum Flow Rate (gpm) | 8 |
| pH range | 6.7-8.0 |
| Hardness, max. mg/L (ppm) | 1400 (80 grains) |
| Maximum Pressure | Recommended not to exceed 75 psi |
| Minimum Pressure | 30 psi |
| Plumbing inlet/outlet | 1″ |
| Pre-filter Life | 9-12 months |
| Carbon Block Filter | 9-12 months |
| Hard Water Filter Life | 3-5 years |